My New Custom QA1 Coil Overs
#1
My New Custom QA1 Coil Overs
I have not tested them yet due to weather and family comitments, but getting close. I still am waiting on a new rear end with a Detroit Locker, to keep it straight. Here are a couple of pictures.
And here it is set up for the strip.
I am running 14/150 springs, and the ride height is set so the plunger is about 1 1/2 inches from the bottom to allow max travel to help with weight transfer.
And here it is set up for the strip.
I am running 14/150 springs, and the ride height is set so the plunger is about 1 1/2 inches from the bottom to allow max travel to help with weight transfer.
#3
RE: My New Custom QA1 Coil Overs
There are over 100 pictures on the web page covering every part of the car. There is not any thing that has not be modified or replaced.
Just click it, and follow the links at the bottom of the pages.
http://members.tccoa.com/393bird/
Just click it, and follow the links at the bottom of the pages.
http://members.tccoa.com/393bird/
Thread
Thread Starter
Forum
Replies
Last Post
Boostaddict
Lethal Performance
2
09-08-2015 09:56 PM