Good cam for GT-40ps?
#51
RE: Good cam for GT-40ps?
ORIGINAL: Hamutoff
you do have 4 suggestions (OTS with the idea of NOT custom tuning) floating around in the detritus of this thread:
1)stock 5.0 roller cam
2)steeda 19
3)comp cams HR 266
4)crane 2030
4 suggestions, that’s pretty damn good response to the tight criteria you stipulated!!
so go for one man
you do have 4 suggestions (OTS with the idea of NOT custom tuning) floating around in the detritus of this thread:
1)stock 5.0 roller cam
2)steeda 19
3)comp cams HR 266
4)crane 2030
4 suggestions, that’s pretty damn good response to the tight criteria you stipulated!!
so go for one man
#52
RE: Good cam for GT-40ps?
ORIGINAL: XPBaller
okay. let me explain something. I have a shortblock sitting in my living room with plans of Canfield aluminum heads, CI CUSTOMcam (ohhhh omgomgomg custom), new pushrods/lifters, 1.6 RRs, ported GT-40 lower and a KB Flowzilla. this, of course, is going to take a lot of money, so for the time being im throwing together something that will give me a little extra power to tide me over until i have that project done. I cam across the GT-40ps for 150$, i have an explorer intake, and i want to find a cheap, used OTScam that willcompliment the heads. with that said ...
I DONT GIVE A **** ABOUT A CUSTOM CAM ON THIS ENGINE..... so please, shut the **** up about it and recommend me an OTS cam thats been proven on the p's.
okay. let me explain something. I have a shortblock sitting in my living room with plans of Canfield aluminum heads, CI CUSTOMcam (ohhhh omgomgomg custom), new pushrods/lifters, 1.6 RRs, ported GT-40 lower and a KB Flowzilla. this, of course, is going to take a lot of money, so for the time being im throwing together something that will give me a little extra power to tide me over until i have that project done. I cam across the GT-40ps for 150$, i have an explorer intake, and i want to find a cheap, used OTScam that willcompliment the heads. with that said ...
I DONT GIVE A **** ABOUT A CUSTOM CAM ON THIS ENGINE..... so please, shut the **** up about it and recommend me an OTS cam thats been proven on the p's.
i am suppose to be picking up a motor today. it has an E cam in it 100 bucks shipping its yours.
here our your other suggestions
you do have 4 suggestions (OTS with the idea of NOT custom tuning) floating around in the detritus of this thread:
1)stock 5.0 roller cam
2)steeda 19
3)comp cams HR 266
4)crane 2030
4 suggestions, that’s pretty damn good response to the tight criteria you stipulated!!
so go for one man
this thread is done your question has been answered
Thread
Thread Starter
Forum
Replies
Last Post
Luke9222
4.6L General Discussion
19
10-22-2015 11:55 PM