Help pulling a 5sp tranny out of a 92 lx 5.0
I found what seems to be a decent 5sp tranny at the junk yard today. What is involved in pulling it of the car and how can I tell on a non-running car if the tranny is good?
|
RE: Help pulling a 5sp tranny out of a 92 lx 5.0
as long as it spin over the only real way to tell is install it and run through the gears to see if any sincros are trashed as far as what's needed to remove....if bellhousing isn't needed unbolt 4 bolts holding it to it, remove shifter = 4 bolts, h- pipe, speedo gear cable and any elec connections, crossmember and tranny mount and driveshaft and it should pull right out:D
|
RE: Help pulling a 5sp tranny out of a 92 lx 5.0
Put the car on jackstands as high as you can.
remove the shifter Drop the drive shaft drop you H pipe Drain tranny fluid Unplug all connections pull out speedo cable/gear unbolt the bellhousing or just the front of the tranny if you want(just doing the tranny will be easier, wont have to mess with the clutch cable) remove crossmember lower tranny |
All times are GMT -5. The time now is 04:38 AM. |
© 2024 MH Sub I, LLC dba Internet Brands