kcannon88

I have an '86 302 that I am putting into a '93 4 cyl coupe. I realize that the pistons dont have any notches in them. I have heard that I can use the e303 cam and it should fit with piston to valve clearance. My question is if this is true. Also, I would like to know if GT40p heads will work with the '86 motor and e303 cam.

my77stang

try it and let us know

btw, the valves are situated higher in the heads on the E6SE castings - so if the E303 works with the 86 heads it may still NOT work with the GT40P's