MustangForums.com

MustangForums.com (https://mustangforums.com/forum/index.php)
-   5.0L (1979-1995) Mustang (https://mustangforums.com/forum/5-0l-1979-1995-mustang-14/)
-   -   Need Help ASAP!!! (https://mustangforums.com/forum/5-0l-1979-1995-mustang/37684-need-help-asap.html)

mstng675l 03-10-2005 12:58 AM

Need Help ASAP!!!
 
Hey all i am going to be ordering a new mass air meter tonight and need to know if the Pro-M mass air meter is legal or not... Thanks in advance....

Ohh if you can tell me were the carb E.O number is on the net or where it says that it is legal in California... Thanks....

mstng675l 03-10-2005 01:00 AM

RE: Need Help ASAP!!!
 
Ohhh and if not can you let me know what mass air you would buy and let me in on some vendors that sell some good 50state street legal MAFs...

bobby 03-10-2005 01:01 AM

RE: Need Help ASAP!!!
 
its should be perfectly legal. i thoguth that stang in ur sig is ur only car?

mstng675l 03-10-2005 01:07 AM

RE: Need Help ASAP!!!
 
No i just bought a 1988 mustang GT... But are you sure that its legal because i have to pass smog and the stocker MAF is bad.. The reason i believe that its bad is because my car throughs a check engine light when given throttle and at high rpms, such as 5300rpms, i get black smoke...

ORIGINAL: bobby

its should be perfectly legal. i thoguth that stang in ur sig is ur only car?

Dan89lx 03-10-2005 01:09 AM

RE: Need Help ASAP!!!
 
you might use a code scanner to be certain what is wrong before you go buying a $200-$300 MAF, my pro M doesnt have an E.O. on the unit itself. I got it used so I never seen the origonal packaging

mstng675l 03-10-2005 01:33 AM

RE: Need Help ASAP!!!
 
Well i ordered the Pro-M 75mm MAF so its a done deal, but thanks for the opinions... What else do you think could cause the problem??? I think its the MAF or 02 sensors, thats the only thing i could come up with...

ORIGINAL: Dan89lx

you might use a code scanner to be certain what is wrong before you go buying a $200-$300 MAF, my pro M doesnt have an E.O. on the unit itself. I got it used so I never seen the origonal packaging

angcobra 03-10-2005 11:53 AM

RE: Need Help ASAP!!!
 
Wished I had seen this earlier, what injectors you running? I have a PRO-M 75 MM Bullet and 24# injectors I just took off I could sell.

mstng675l 03-10-2005 12:44 PM

RE: Need Help ASAP!!!
 
Hey thanks for the thought though... I wish i would have known but i need the MAF here as soon as possible so it was a hasty decision... I have to get the thing smoged ASAP so that i can get it registered without problems... You know what i mean???

Thanks though....

Just for the sake of asking...How much would you sell them to me for i might think about it if the offer still stand for later on down the road....

ORIGINAL: angcobra

Wished I had seen this earlier, what injectors you running? I have a PRO-M 75 MM Bullet and 24# injectors I just took off I could sell.

Tims 88GT 03-10-2005 12:47 PM

RE: Need Help ASAP!!!
 
angcobra, what do you want for the pro-m 75mm maf? is that calibrated for 24lb injectors?

angcobra 03-10-2005 12:56 PM

RE: Need Help ASAP!!!
 
It is calibrated for 24# injectors. I want to sell the meter and injectors together. The meter is PRO-M 75MM Chrome Bullit, the injectors are 24# Cobra injectors. $225 plus delivery.


All times are GMT -5. The time now is 05:35 PM.


© 2024 MH Sub I, LLC dba Internet Brands