331 strocker swaped completed
 

I just got my 331 strocker installed its good but it thought the torque will feel alot differrent .
The timing is set at like 12* .
tfs twisted wedge heads
bbk long tubes
bbx o/r x pipe
msd dizzy
ported lower cobra manifold
jegs intak box
70mm tb
75 mm maf
24lb injectors
28oz flywheel
.
Ineed a bigger fuel pump my is still stock

RE: 331 strocker swaped completed
 

sounds nice did you get a chance to drive it yet?

RE: 331 strocker swaped completed
 

What cam and intake are you using?

RE: 331 strocker swaped completed
 

yea it runs wayyyyy better then it did before. im using the jegs intake box. im runnig a b cam

RE: 331 strocker swaped completed
 

Jegs intake box on a GT40 lower or stock lower?

RE: 331 strocker swaped completed
 

ported gt40 lower

RE: 331 strocker swaped completed
 

how much hp r u getting out of your 331 92greyGt

RE: 331 strocker swaped completed
 

I haven't run it on the dyno. I did the online estimators and they said around 380-390rwhp. That seems a bit high. For my birthday my mom gave me a gift certificate to the local shop with a dyno so I am goingto run it on 1/4/08.

RE: 331 strocker swaped completed
 

I would think that intake and or cam is hurting you some. The cam runs out of steam when the intake is getting ready to go. Try and find a stage 2 Trick Flow cam or a X or Z 303 cam. That or find a Trick Flow track heat, Edelbrock rpm 2, or GT40 upper.

RE: 331 strocker swaped completed
 

whats wrong with the jegs upper box it says it out flows the gt40 upper by 20 hp