Need help, narrowed down to 2 cams
03-03-2008, 07:10 PM
#31
3rd Gear Member
Thread Starter
Join Date: Jul 2007
Posts: 528
RE: Need help, narrowed down to 2 cams
I received my cam specs today from CI.
Duration @ 0.50 = 220.12 intake, 225.69 exhaust
Gross lift = .569 intake, .564 exhaust
Lift at top dead center = .0531 @ 109.06 In. center, .0447 @ 115.20 Ex. center
Vaccum @ idle = 15. 1 inches
Idle RPM = 750
Peak Torque @ 4400rpm
Peak HP @ 6000rpm
Starting Shift Point = 6500rpm
Plus a lot of other data. I'm a little worried that my converter will not stall high enough, but we shall see.
Duration @ 0.50 = 220.12 intake, 225.69 exhaust
Gross lift = .569 intake, .564 exhaust
Lift at top dead center = .0531 @ 109.06 In. center, .0447 @ 115.20 Ex. center
Vaccum @ idle = 15. 1 inches
Idle RPM = 750
Peak Torque @ 4400rpm
Peak HP @ 6000rpm
Starting Shift Point = 6500rpm
Plus a lot of other data. I'm a little worried that my converter will not stall high enough, but we shall see.
Thread
Thread Starter
Forum
Replies
Last Post
junior04
4.6L (1996-2004 Modular) Mustang
1
09-28-2015 10:53 AM
