When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
5.0L (1979-1995) MustangTechnical discussions on 5.0 Liter Mustangs within. This does not include the 5.0 from the 2011 Mustang GT. That information is in the 2005-1011 section.
can anyone point me in the right direction. im trying to put my line lock in and i discovered that on these mustangs that the passenger side front brake line goes to the proportioning valve and so does the line that goes to the rear but the driver front goes directly into the master cylinder. does anyone know how i do the brake lines?
I installed one for a customer in the front lines that come out of the master cylinder ..betweeen that and the distribution block for the front brake set up
I did a lot of searching when I did mine, cant remember off the top of my head which line was which, I know pro has some pictures of his setup in an older thread