MADE2GO PONY

I am switching my efi to a 408 srtoker carburated. Anyone know what changes i have to make to fuel system?

Quik

a manual pump or a lower psi electric one. you will need a regualtor. since most Carbd motors only require 4 to 8 psi or so

fats429

Evry thing must go . pick up, pump, lines . A 408 could most likely use a sump tank but 1/2" pick ups are avable . ford has front cover swaps for a mech. pump with pump cam and big cam dowle . but a ele. pump will be easyer .

vfast

I would replace all the lines to a larger dia. one..have your electric pump back by the gas tank...with you filter..

69mach1377

For that motor, get a pump that will put out 7-8 psi (or regulate to that) and flow 90+ gal/hour, could be electric or mechanical...

MADE2GO PONY

I have the BBK 225 lph in-line fuel pump......will that work?

mkspeed26

what is trhe psi on it? im pretty sure that is an efi pump so that would mean no

w8less

UR wanting to make urs carb? i want to make my mine fuel injected what did u do to make it fuel injected. email me at jasperstang308@yahoo.com

C/Note

i done a swap for my freind he had 90 gt ,,put 351w in it ,,i dropped the tank ,,took out stock elect pump i ran a line to the sending top to the bottom of the tank ,,you can run 2 line down in tank if you want , thats what i did ,,cause he ran nos ,,had 2 fuel pumps...and still hed stock sending unit to boot...o the ran 2 holley blue pumps[IMG][/IMG]