86_GT_5.0

im going to be installing lakewood 90/10s in the front lakewood 50/50s in the rear airbag rr eibach drag springs lower control arms, how much with this help, everything is stock right now but i have the front sway bar out, will i see any differences in et's? oh and by the way the car has lowering springs in it right now

rust_stang

You'll notice a difference

PJC Racing

It would work much better with stock springs.

Rajun_Cajun

I would use 4cyl springs in the front and V-6 springs in the rear. I believe the Eibachs are a progressive rate spring.

mjr46

YOU'LL be fine I have same shock set up as you have and it works well

nitrous_bob

i think you'll see huge difference

every tenth of 60' is worth about 2 tenths on ET

if you were cutting 1.8x b4...you'll hit 1.6x now i'll bet ya