bikeboy587

I'm going to be doing my h/c/i and will be pulling my tranny with the motor. Where can I get a plug that will fit into the tail of my tranny so that when i take off the driveshaft i won't empty out my t-5 onto the driveway?

Thanks

bikeboy587

anyone?

nseoi

good luck with that, try an autoparts
i always get soaked in that stuff lol

nitrous_bob

well it should only spill a little...the ds doesn't seal it up

but try http://www.ddperformance.com or ebay

if you don't find it...just keep it level and you'll only lose about 2 taplespoonsfull

or jsut drain it and refill it w/ synthetic later

bikeboy587

when pulling the motor and tranny keeping it level is not an option

jagman454

when you take the driveshaft out, maybe you can find one of those shipping seals off a old T5 or something and just shove it in the outputshaft , or if you have the top connector of a driveshaft minus the actual driveshaft itself, you might be able plug it up that way.

94Yellow50

ive heard of people doin that^^^ if they had an old d shaft layin around..just use the yoke part...or just take an old tshirt..wad it around the end.and tape the hell outta it ..we did that once..not sayin its gonna keep the fluid in the tranny...but it will keep it from runnin allover the place..

bikeboy587

not sure i got one but its an idea...

sowaxeman

I used the spare yoke method when i did mine last month. A bunch of club buddies tell me you can get a plastic or rubbertail shaft plug from Napa.

bikeboy587

thank you! ill give them a call