5.0L (1979-1995) Mustang Technical discussions on 5.0 Liter Mustangs within. This does not include the 5.0 from the 2011 Mustang GT. That information is in the 2005-1011 section.

Quick n easy speedo question.

Thread Tools
 
Search this Thread
 
Old 04-12-2005, 07:21 PM
  #1  
Dbeck002
I ♥ Acer
Thread Starter
 
Dbeck002's Avatar
 
Join Date: Jul 2004
Location:
Posts: 1,802
Default Quick n easy speedo question.

Just making sure, the speedo calibration gear is located on the driver side to the rear on the T5 tranny right? there is a small loop clip that i must pull to remove the stock gear. im doing this now.
Dbeck002 is offline  
Old 04-12-2005, 07:25 PM
  #2  
stanglx2002
6th Gear Member
 
stanglx2002's Avatar
 
Join Date: Feb 2005
Location:
Posts: 5,205
Default RE: Quick n easy speedo question.

yes there is one bolt that hold the speedo in there and a clip that holds it in there and yes just pull it and the speedo comes right off
stanglx2002 is offline  
Old 04-12-2005, 07:26 PM
  #3  
Dbeck002
I ♥ Acer
Thread Starter
 
Dbeck002's Avatar
 
Join Date: Jul 2004
Location:
Posts: 1,802
Default RE: Quick n easy speedo question.

thanks dood.
Dbeck002 is offline  
Old 04-12-2005, 11:23 PM
  #4  
stanglx2002
6th Gear Member
 
stanglx2002's Avatar
 
Join Date: Feb 2005
Location:
Posts: 5,205
Default RE: Quick n easy speedo question.

anytime
stanglx2002 is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Stone629
The Racers Bench
66
06-02-2016 09:52 PM
TimeLord101
New Member Area
2
10-01-2015 06:40 AM
tj@steeda
Florida Regional Chapter
0
09-30-2015 08:04 PM
MustangForums Editor
Mustang News, Concepts, Rumors & Discussion
0
09-25-2015 06:30 PM



Quick Reply: Quick n easy speedo question.



All times are GMT -5. The time now is 11:42 AM.