five0fm

hey guys i gota real good offer ona stroker kit from a friend. its got an eagle cast steel crank and steel i beam eaglerods but the pistons are forged. question is how much better is this crank and rods then my stock crank/rods out of the 351? and about how much hp can they support? thanks in advance

uedlose

the stuff is a good bit stronger then stock stuff so they say. It should out last the stock block as far HP. I think they rate that stuff at 650 hp or so. but that don't mean it wont take more.

five0fm

thanks man i appriciate the answer. any more input from anyone?

67mustang302

The basic cast steel stuff from Eagle and Scat as as strong as or stronger than the stock stuff(the stock stuff is still pretty strong). It's generally lighter too.

five0fm

thanks for the response. still looking for a little more input before i buy so and info is appriciated

67mustang302

If it makes you feel any better I have an Eagle cast steel crank in my 302.

five0fm

how much power are you putting out...anyone else run these?