90Mustangfan

Is it possible to stay N/A with a 331 stroker, and make 600hp to the flywheel?

C/Note

i would say yes buts its got to be an all out race engine lots copmression heads and cam...like 14 to1 700 plus lift killer set of heads ..no street motor can make that for an every dayer

90Mustangfan

the compression is 10.2.1, actual compression, and the car has edlebrock victor jr. 220cc race heads, comp cams .600 lift custom grid cam. Its totally a race car...It has no smog stuf whats so ever. it has everything done to it. so is it possible?

C/Note

ok that s the only way ..i got 408 with 12.5 to1 with 700 lift ,,victor jrs ,,i havent dynoed it yet,,i just got bigger carb onit ..and working on the chassis some ..will dyno after i run it once more ,,n/a and and n.o.s.

C/Note

you got a solid roller ,,your compression looks low that for 600 hp...go with some n.o.s with that compression like 250 at least or dual stage..150 plus 250 ..

90Mustangfan

well If I went Nos then Id run a 400 shot, thats what the engine was built for.I personally dont want to use Nos. Oh and this car is isnt carb. it has performer rpm intake, the car rev and make power all the way up to 7500rpm.Its suppose to run 10's.So its possible? to have 600 horse?

C/Note

you might run 10s , 600 hp dunno ,im not just yet on motor ,,i only had 750 carb now i got 1000 demon,,,all motor was 11.44/119 only 2 passes first time out with no tuning under hood..me ..love nos i hate running without it ,,i got to bulid a dart blk next ,,so i can fog it ..you got the mm/ff book with the 418 build up it had same combo as my 408 almost put out just a tad over 600 hp at f/wheel