5.0 rebuild question..
#1
5.0 rebuild question..
I'm basically redoing the whole engine. Now I had just a few questions:
First off, this is what I bought:
Ford Racing 5.0 Cobra Upper Engine Kit Polished (includes heads, cam,
Pre-Assembled Block with everything
Headers
MSD distributor
BBk C/A intake
75mm Throttle Body
I need injectors as well...what lb do you recommend?
What gears do you recommend I go with? I was thinking 3:55??
Is there anything else that I need to purchase?? Like the pulleys and etc?
Anything else?
First off, this is what I bought:
Ford Racing 5.0 Cobra Upper Engine Kit Polished (includes heads, cam,
Pre-Assembled Block with everything
Headers
MSD distributor
BBk C/A intake
75mm Throttle Body
I need injectors as well...what lb do you recommend?
What gears do you recommend I go with? I was thinking 3:55??
Is there anything else that I need to purchase?? Like the pulleys and etc?
Anything else?
#2
RE: 5.0 rebuild question..
Underdrive pullie kit,
shortie or long tube headers,
x pipe and your choice of cat backs.
3:55's ARE OK, 3:73'S better
Synthetic Oil, Motorcraft Filter.
Set Timing at 14* BTDC
24lb Injectors, MAF CALIBRATED FOR THEM
I can see you running 12's
shortie or long tube headers,
x pipe and your choice of cat backs.
3:55's ARE OK, 3:73'S better
Synthetic Oil, Motorcraft Filter.
Set Timing at 14* BTDC
24lb Injectors, MAF CALIBRATED FOR THEM
I can see you running 12's
#4
RE: 5.0 rebuild question..
Thanks for the help too....is there anything else other than:
Engine kit
Fully Assembled Block
3:73 Gear Kit
MSD distributor
24lb injectors
BBK Cold Air Intake
75mm Throttle body
Underdrive pulley set
Oil/plugs/wires/distrib cap
shortie headers (will these bolt up to my h-pipe that is already installed?)
Engine kit
Fully Assembled Block
3:73 Gear Kit
MSD distributor
24lb injectors
BBK Cold Air Intake
75mm Throttle body
Underdrive pulley set
Oil/plugs/wires/distrib cap
shortie headers (will these bolt up to my h-pipe that is already installed?)