351W in!!!
#1
351W in!!!
the new pics start about 2/3 the way down. steve (broken) came over and we got it in. its just sitting on wood in the engine compartment now cause the mounts didnt get here yet. the heads on it in those pics are just stock scrap heads. im not done porting the ones for it yet.
http://www.cardomain.com/memberpage/639767/6
http://www.cardomain.com/memberpage/639767/6
#6
RE: 351W in!!!
during the week i should get the other heads on and it bolted in. ill post em as they come. i wont be runnin 11s yet. next summer when i get my stall converter and full exhaust done i should be close to 11s.
cage was done before i got it. dont know who/how they did it. all i know is the welds are good and its an 8 point
cage was done before i got it. dont know who/how they did it. all i know is the welds are good and its an 8 point
#8
RE: 351W in!!!
ORIGINAL: mkspeed26
during the week i should get the other heads on and it bolted in. ill post em as they come. i wont be runnin 11s yet. next summer when i get my stall converter and full exhaust done i should be close to 11s.
cage was done before i got it. dont know who/how they did it. all i know is the welds are good and its an 8 point
during the week i should get the other heads on and it bolted in. ill post em as they come. i wont be runnin 11s yet. next summer when i get my stall converter and full exhaust done i should be close to 11s.
cage was done before i got it. dont know who/how they did it. all i know is the welds are good and its an 8 point
#9
RE: 351W in!!!
ya, its gonna be carbureted. im goin with the edelbrock air gap performer rpm manifold and a holley double pumper carb (650 or 750, ebay). the carb calculator said 750, but i have been told 650. cam is 234/244 @ .050, .520/.544 lift. displacement is 362. ill prolly just give summit a call.