Driveshaft
How do you get the driveshaft bolts out? I know its a 12mm 12 pt socket i need to use but i cant get the bolts to move at all.
|
RE: Driveshaft
use a breaker bar and balls out keep trying you will get them out.
|
RE: Driveshaft
Liquid wrench or some kind of rust freer then use a powerful impact wrench. If this doesn't work then use a breaker bar with a pipe on the end for more leverage.
|
RE: Driveshaft
Same here...I use a 12 mm 12 point socket and a 3/8 breaker bar (for clearance) and a section of pipe if needed.
|
RE: Driveshaft
Breaker bar...although if the tranny bolts are standard 6 point, use a 6 point socket, nothing worse than stripping the head.
|
RE: Driveshaft
they got lock tight off factory..i got snap on 12 mm 12 point wiggle socket impact that is ..get on on them good ...i had to get one ,,cause i know what your going though...[:@]
|
RE: Driveshaft
BAH just use a fire stick aka torch...jk i used a 12 mm wrench and a small cheater pipe and some PB blast damn i love that stuff also i put it in gear which im sure u prolly did.
|
RE: Driveshaft
thanks for the help guys i got it out with a 12mm 12pt 1/2 drive socket with the impact gun. Now i just cant get the tranny bolts out the same problem they just dont move
|
RE: Driveshaft
use penetrating oil and wait, then muscle it off.
|
All times are GMT -5. The time now is 03:45 PM. |
© 2024 MH Sub I, LLC dba Internet Brands