Car Distributor?
 

I got a 67 Mustang with a new Roller Block installed, I need to know what distributor is needed. I hear that 85 distributors work, if i can't find that specific distributor what else can i use, i dont want to buy a new one.

why cant you find an 85 dizzy for a carbed car??? standard duraspark dizzy can be bought reman at any local parts store:D

Can you get me a link to the proper one needed like from autozone. There are so many dont know which one exactly.

you'll need the one with a steel gear , give me a sec:D

this is the correct one, you'll need the duraspark coil and ignition box too:D
http://www.autozone.com/R,2056430/ve...ductDetail.htm

I have an MSD Blaster Coil, is that all needed. Any wiring diagrams?

msd coils will not work with the duraspark box!!!! they will short it out trust me!!!!! the internal resistance of a msd coil is all wrong for the duraspark box, you need the duraspark coil = 15 bucks from autozone or the moment you hook it up it most likely will short the box out, been there done that!!:D

Can you give me a link to that too, i tried looking for it cant find it. Just send me a link of the other 2 things needed.

Also what happens if i use the distributor with the cast iron gear. For the steel gear i have to wait like 3 days to get.

you'll tear up the gear and send metal through out the motor so don't even think of doing that!!!!!!!!!!")

http://www.autozone.com/R,593890/veh...ductDetail.htm
http://www.autozone.com/R,2525124/ve...ductDetail.htm