Hi im the new guy.. i have some questions :)
hi folks.. im building a 327 stroker
i found a good deal on a 1996 explorer Gt40 5.0 it has the Gt40 heads. BTW( brand new gt40 lower intake forsale ) nwy i want to build a 327 3.250 crank with stock bore since the engine is brand new :) i found some kits out there for my app http://store.summitracing.com/partde...D&autoview=sku or one of these kits why are some of them so expensive? http://store.summitracing.com/egnsea...115+4294924746 thanks... im going to put the engine in a 1978 F150 Ford or A 1993 F150 flareside.. with a C6 trannie here are some pics of the beast http://i198.photobucket.com/albums/a...6/IMGP8425.jpg http://i198.photobucket.com/albums/a...6/IMGP8422.jpg |
for a stroker your gt-40 heads will hold back the full potential of that motor, imo 347 ftw
heck if it's going in a truck I'd just put the motor in as is!! unless your building a street strip truck:D |
ohh really ? ahh ok ok .. well ill just iswap a cam then and lower the engine as is :) thanks!!!
lol i aint building a street strip truck but i want a truck that moves good.. atleast to run high 15's what do you guys think about this cam?? http://store.summitracing.com/partde...t=CCA-35-349-8 i know it has the same lift as a F303 cam but a friend of mine swapped a F303 cam in his truck he took it out in a month it doesnt have the torque a truck needs.. he installed that cam and is very happy... |
looks as if that cam is designed for lower rpm and torque which is where you'd want a truck to develop power = down low for pulling or towing, if your not concerned with it being a strip truck as stated then like I said I wouldn't spend all that money to do a stroker.....that motor should meet your expectations as is as long as the truck will have a decent exhaust and gears in the rear:D
|
Originally Posted by mjr46
(Post 5428985)
looks as if that cam is designed for lower rpm and torque which is where you'd want a truck to develop power = down low for pulling or towing, if your not concerned with it being a strip truck as stated then like I said I wouldn't spend all that money to do a stroker.....that motor should meet your expectations as is as long as the truck will have a decent exhaust and gears in the rear:D
like i said i just want a good truck with a good motor.. not a street strip but something to run high 15's - 16's ;) |
motor looks to be in good shape!!:D
|
Camshaft
Long Tube Headers 3:73 Gears Advance Timing You'll be happy, I drove a stock explorer with that motor, stock timing etc, it pulled decent. |
All times are GMT -5. The time now is 11:21 PM. |
© 2024 MH Sub I, LLC dba Internet Brands