Red95GT5.0

Do you guys think if i got some gt-40x aluminum heads, 1.7 roller rockers, trick flow intake manifold, and a E303 cam. i would hit the 300 to the wheels mark? or how close i might be thank u

calfroper_06

with the mods in your sig plus those, i would say you would

mjr46

with a different cam choice it'd make it a lot easier and with a tune, I'd say over 300 is easy

Tberg725

Ill 2nd that lol.

NoGo95GT

Not to be a party pooper, but with an auto, there is no way you'll hit 300rwhp. You may make 270rwhp and that's about it. Plus, the GT-40's are on the lower performance spectrum, as far as aluminum heads are, and the cam is old technology, although still decent. I made 271rwhp and 311rwtq through an auto with TrickFlow heads, Trickflow Stg-1 cam and an un ported GT-40 intake.

83gtragtop

270rwhp. Your heads not one of the best. An E cam is not going to make as much power as a good custom ground cam.

luckythirteen13

get better heads and youll make it for sure

Red95GT5.0

Well if i can at least hit 270 ill be happy, just shooting for the 300 mark. i do intend to change my auto to a five speed, and the reason why i picked the cam and heads is because ill get an employ discount on them, if not i would change my set up. thanks for the input btw guys apperciate it

Catchpole

Where do you work? If you don't mind me asking, I live in Washington and I've been looking for a decent local place

1995mustang818

i dont see you anywhere near 300 with out an intake manifold unless i missed it some where