snakegriffin5_0

So I got my new BBK h from Summit today and was disappointed to find it came in two pieces (comes together at crossover). I went with the BBK instead of the Summit because I knew the Summit was two pieces, and thought the BBK was one.

Any opinions on the two piece design? I am not so sure about it, the way I figure it is just one more opportunity for a leak.

Any thoughts are helpful...Sorry if this has been discussed.

wowvfast

it's in 2 pieces to save you the over size shipping prices

1988TTOP

it will be fine have it welded together or use a muffler clamp

snakegriffin5_0

Well it came with a clamp, and I understand why its two pieces, I guess I was more curious if anyone has had trouble with their similar mid pipes. Still have a month or so before I get the car out, so plenty of time to get a different one if I want.

Thanks again.

Timspony

it will be fine! + simple to take off in the future if needed!

93 LX FiveO

i welded mine

the catback flanges like to leak too. i also welded those.

camaroeater

you be glad its in two pieces when you go to install it, you'll have more room for adjustment.

mustangsneverdie

mines held together wth a muffler clamp and it's able to to move around but it doesn't leak

S-Trimmed302

You will be GLAD its a 2 piece when you go to install it and when you go to Remove it!!I dont recommend Welding it at the H Pipe use a Band clamp to clamp it together.Look at it this way when you decide to remove it,sell it and move onto something else you will just have to remove the clamp and it will fit into a shippable box whereas if you weld it your screwed you will be stuck selling it locally.Not to mention it installs
much easier in 2 pieces....Been there done that.

AdderMk2

stop being such a ****ing baby and just put it on the car