cavemile

ok so you guys dont like the gt40p heads? Ok so without robbing the bank what do you suggest for this 347 im trying to match togeather? Im looking for 385 or so HP. if i stay with 24lb injects will they produce vs 30lbs. I havent gotton the kit yet either for the stroker . any suggestion? i dont care much for scat. i could use the help ?

mjr46

tfs fast as cast 190 heads

cavemile

tf do they come ported ? 190 is that the valve? what about the intake? can i get by with the cobra stuff??

cavemile

ok been looking at the trick flow, theyve got alot to choose from ? im not an engine builder so im a bit lost. I want the 347 for the tork vs the 302. im tryin to build a full out race motor . i need street strip. so dont know how far i want to go with hi po parts?

mjr46

190 is the intake runners and they have room to grow for porting
http://www.trickflow.com/egnsearch.a...7&autoview=sku

mjr46

andno I would not use the cobra intake, possibly a track heat intake and with such a combo you'd have a nice street/strip 347, that's to say you have a good cam too, have one custom taylored once your combo is outlined and you won't be sorry at the results it produces.

Hippy

everyones got 347's these days be diff!

mjr46

do you???????

cavemile

thanks mjr46 i will look into the intake you talked about. Thare are so many ways to go. I want the tork , lope , oh ya HP , but keep it on the street too. I just have a good stock block , im looking for around 385 to 430 hp . thanks