I need help with installing upper and lower intake on 1991 5.0
#1
I need help with installing upper and lower intake on 1991 5.0
Ok I have a 1991 5.0 block that I had built up, But I am left to install the upper intake. I have the upper intake and I have the tree looking thing that goes under it. Now i am comfused with what I connect to what. The lower intake is on the block and I know there is a whole in the back of the intake, what goes there? I will not be running a egr, i have the egr delete plate and did the smog pump delete on the motor, so can anyone help me with pics so I can see what goes where and how to run the hoses.
Thanks
Thanks
#2
The tree looking thing I believe what you mean is for the lifters. It bolts down to the block and holds the lifter dogbones in place.
The big hole in the back is for a pcv valve it just hooks to a vacuum port on the upper intake.
The big hole in the back is for a pcv valve it just hooks to a vacuum port on the upper intake.
Thread
Thread Starter
Forum
Replies
Last Post
inyadreems
Archive - Mustangs For Sale
2
08-21-2015 09:10 AM