doggy with 24 pound injectors help
05-14-2009, 10:55 PM
1st Gear Member
Thread Starter
Join Date: Mar 2008
Location: indiana
Posts: 80
doggy with 24 pound injectors help
i just installed 24 lb injectors and is dogg from idle all the way to the top end. do i need a hotter spark or adjust the fuel pressure or chang the timing i dont know what to do. this will be the third time i have put on the 24s and mass air but runs the a little better this time since i put long tube headers on. please help
05-14-2009, 10:57 PM
Banned
Join Date: Dec 2005
Location: Lil' Rhody
Posts: 22,376
are you sure that you are running a 24# calibrated MAF?
also, reset your ECM
05-14-2009, 11:10 PM
1st Gear Member
Thread Starter
Join Date: Mar 2008
Location: indiana
Posts: 80
the mass air has 24 scribed on it how do you rest the ecm
05-14-2009, 11:18 PM
1st Gear Member
Thread Starter
Join Date: Mar 2008
Location: indiana
Posts: 80
i unhooked the batt when i insalled the injectors if that how you reset the ecm
05-15-2009, 01:24 AM
M.A.D. Motorsports
Join Date: Jul 2006
Location: Indiana
Posts: 8,014
Well what is your timing and FP at? What alum heads do you have?
05-15-2009, 10:26 AM
1st Gear Member
Thread Starter
Join Date: Mar 2008
Location: indiana
Posts: 80
timing 15 advanced elederbrock performer
05-15-2009, 01:11 PM
1st Gear Member
Thread Starter
Join Date: Mar 2008
Location: indiana
Posts: 80
i have had the fuel pressure set at low 30s to mid 40s runs the same
05-15-2009, 06:57 PM
5th Gear Member
Join Date: Aug 2006
Location: Haverhill, MA
Posts: 3,664
05-15-2009, 09:28 PM
2nd Gear Member
Join Date: Jul 2008
Location: Ohio
Posts: 323
05-15-2009, 09:57 PM
D.R. THE PATHETIC DORK
Join Date: Jun 2007
Location: West Virginia
Posts: 30,863
drive it around a little while and allow ecm to adapt to new changes
