5.0L (1979-1995) Mustang Technical discussions on 5.0 Liter Mustangs within. This does not include the 5.0 from the 2011 Mustang GT. That information is in the 2005-1011 section.

Buddy ran through some water, not it won't start... help!?

Thread Tools
 
Search this Thread
 
Old 05-22-2009, 04:44 PM
  #1  
Sick5.0LX
2nd Gear Member
Thread Starter
 
Sick5.0LX's Avatar
 
Join Date: Apr 2005
Location:
Posts: 192
Default Buddy ran through some water, not it won't start... help!?

Hey guys....right now in FL we are having these crazy rain storms (havent seen the sun in a week), with some places in central FL with over 2 feet of rain. My buddy was surprised when he tried to make it through a "puddle" which ended up being enough to choke out his engine. (he has dumps, he thinks that might be part of the problem). Well.. it stalled out, and won't start. There is a bit (not alot) of water in the intake, and injectors look decent. Starter starts up fine, and everything sounds great except that it doesn't fire. Is this electrical, or fuel delivery? if his engine was hyrdolocked, could you tell just from the sound of the engine trying to turn over??

Thanks for any help we can get!!
Sick5.0LX is offline  
Old 05-22-2009, 05:15 PM
  #2  
shawnk007
2nd Gear Member
 
shawnk007's Avatar
 
Join Date: Jun 2007
Location: Ohio
Posts: 410
Default

pop off your dizzy cap....
shawnk007 is offline  
Old 05-22-2009, 09:14 PM
  #3  
mjr46
D.R. THE PATHETIC DORK
 
mjr46's Avatar
 
Join Date: Jun 2007
Location: West Virginia
Posts: 30,863
Default

make sure there isn't moisture inside the distributor cap
mjr46 is offline  
Old 05-22-2009, 11:12 PM
  #4  
Sick5.0LX
2nd Gear Member
Thread Starter
 
Sick5.0LX's Avatar
 
Join Date: Apr 2005
Location:
Posts: 192
Default

Originally Posted by mjr46
make sure there isn't moisture inside the distributor cap
thanks guys.. he said he checked that and it looked fine. We are gonna pull plugs and injectors and see how that turns out...
Sick5.0LX is offline  
Old 05-23-2009, 08:26 AM
  #5  
ewgoetz
3rd Gear Member
 
ewgoetz's Avatar
 
Join Date: Nov 2007
Location: Venice, FL
Posts: 912
Default

go to auto zone and get one of those sparkplug lights that you put inline the sparkplug wire and light up when u crank the motor and make sure there is spark. If it was hydro locked the motor wouldnt turn over i'd think. Also if the motor was under water check the dipstick to see if there is any paste that looks like mayo. If ya see any than the motor will need to be rebuilt. cause the water will get into everything and begin to rust than later seize the motor or damamge it by spinning bearins .
ewgoetz is offline  
Old 05-23-2009, 04:45 PM
  #6  
redpony88
4th Gear Member
 
redpony88's Avatar
 
Join Date: Oct 2007
Location: Houston, TX
Posts: 1,049
Default

was this puddle up to his doors? if so he better pray he didnt suck water up the exhaust and bend a rod.... we had some bad rain a few weeks ago and there's cars that got some bent rods coming in
redpony88 is offline  
Old 05-23-2009, 06:45 PM
  #7  
mjr46
D.R. THE PATHETIC DORK
 
mjr46's Avatar
 
Join Date: Jun 2007
Location: West Virginia
Posts: 30,863
Default

if the motor were hydrolocked it would not turn over.......what you need to do is check for spark and fuel and go from there
mjr46 is offline  
Old 05-23-2009, 07:55 PM
  #8  
Sick5.0LX
2nd Gear Member
Thread Starter
 
Sick5.0LX's Avatar
 
Join Date: Apr 2005
Location:
Posts: 192
Default

Originally Posted by mjr46
if the motor were hydrolocked it would not turn over.......what you need to do is check for spark and fuel and go from there
this is what I was thinking... it sounds fine, just sounds like no fuel delivery/spark to me!
Sick5.0LX is offline  
Old 05-23-2009, 09:26 PM
  #9  
mustangsneverdie
5th Gear Member
 
mustangsneverdie's Avatar
 
Join Date: Oct 2007
Location: Georgia
Posts: 2,624
Default

does the fuel pump come on
mustangsneverdie is offline  
Old 05-24-2009, 01:44 AM
  #10  
rmodel65
Yukon Cornelius
 
rmodel65's Avatar
 
Join Date: Oct 2005
Location: deep in the heart of dixie GEORGIA
Posts: 11,808
Default

wd40=water displacement formula 40 use it to dry out the dizzy cap wires etc
rmodel65 is offline  


Quick Reply: Buddy ran through some water, not it won't start... help!?



All times are GMT -5. The time now is 07:10 AM.