Gas pouring out of carb
#12
Most mechanical pumps do not need to be regulated.
Most likely the needle is off the seat from either a WAY out adjustment. I've also seen them adjusted too far down and the flats can't reach the needle assembly to bring them back up. Or it's the smallest piece of **** caught in the seat, not allowing the needle to go up.
Most likely the needle is off the seat from either a WAY out adjustment. I've also seen them adjusted too far down and the flats can't reach the needle assembly to bring them back up. Or it's the smallest piece of **** caught in the seat, not allowing the needle to go up.
Thread
Thread Starter
Forum
Replies
Last Post
bradleyb
Classic Mustangs (Tech)
3
11-27-2015 07:50 PM