5.0L (1979-1995) Mustang Technical discussions on 5.0 Liter Mustangs within. This does not include the 5.0 from the 2011 Mustang GT. That information is in the 2005-1011 section.

throw out bearing?

Thread Tools
 
Search this Thread
 
Old 06-28-2009, 10:53 AM
  #1  
1988GTstang
3rd Gear Member
Thread Starter
 
1988GTstang's Avatar
 
Join Date: Mar 2008
Location:
Posts: 508
Default throw out bearing?

when the clutch is complete out as in nuetral or driving in gear with no pressure on the clutch there is a slight squeaking/chirping but with very little pressure it goes away..i kno this is typical of throw out bearings but i just did my clutch in jan-feb area and it never squeaked is there anything else than can be related to the noise?
1988GTstang is offline  
Old 06-28-2009, 10:56 AM
  #2  
mjr46
D.R. THE PATHETIC DORK
 
mjr46's Avatar
 
Join Date: Jun 2007
Location: West Virginia
Posts: 30,863
Default

did you replace he tob then??
mjr46 is offline  
Old 06-28-2009, 11:42 AM
  #3  
noblesteed92
 
noblesteed92's Avatar
 
Join Date: Jun 2008
Posts: 18
Default

i've had the same problem and it turned out my cluch cable was loose and vibrating...hope this helps!!
noblesteed92 is offline  
Old 06-28-2009, 11:59 AM
  #4  
1988GTstang
3rd Gear Member
Thread Starter
 
1988GTstang's Avatar
 
Join Date: Mar 2008
Location:
Posts: 508
Default

yea i replaced it
noble ima check that thanks
1988GTstang is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
mrtrodonet
V6 (1994-2004) Mustangs
3
09-19-2020 03:12 PM
6bangr
4.6L V8 Technical Discussions
5
02-15-2016 07:40 AM
KingRando
2005-2014 Mustangs
5
10-02-2015 08:06 AM
Drastang
4.6L (1996-2004 Modular) Mustang
2
09-30-2015 03:48 AM
Offendant
V6 (1994-2004) Mustangs
6
09-23-2015 07:21 PM



Quick Reply: throw out bearing?



All times are GMT -5. The time now is 11:13 PM.