thinking im going to pushrod
#1
thinking im going to pushrod
ok so i had two mustangs a 03 gt that i ran a 12.9 with stock gears no tune, longtubes, tb, plenum, RAI, pullys, and some suspention on slicks. then i had a mach that i had full bolt ons inculding headers and ran a best of 12.3 before the headers and pullys. i sold that bc 2 dr tickets and i got a jeep. well the jeep is almost paid off and im thinking about building a new project.
option A: 331 with a turbo in a 94-95 gt with a built c4 down the line. making this a track car.
option B: 302 H/C/I in a 94-95 down the line make it into a 331 with the turbo
option C: 383 from a friend H/C/I all carb no Fuel Injection. (dont want to worry about all the computer stuff)
so far im set on a 94-95. i want to get the motor built before i start looking at cars. sofar option C will be the cheapest since a friend races circle track and has a few extra motors he will sell me one cheap.
Will a 383 fit into a sn-95? that is my main concern.
option A: 331 with a turbo in a 94-95 gt with a built c4 down the line. making this a track car.
option B: 302 H/C/I in a 94-95 down the line make it into a 331 with the turbo
option C: 383 from a friend H/C/I all carb no Fuel Injection. (dont want to worry about all the computer stuff)
so far im set on a 94-95. i want to get the motor built before i start looking at cars. sofar option C will be the cheapest since a friend races circle track and has a few extra motors he will sell me one cheap.
Will a 383 fit into a sn-95? that is my main concern.
#6
so thought about it and talked to my dad today bc he wants to switch his trans in the nova from a turbo 350 to a turbo 400.
the plan
383 for the motor not sure on the compression and specs yet will find out this week sometime. not sure on price
trans will be my dads old turbo 350 with a 3500 stall and ill be putting a trans brake on maybe changing the stall price is free
the motor will be carbed
tubeular k member
430 gears
and for the chasis im looking for a 94-98 rolling prob looking to spend 2k-3k for a clean one i hope not sure yet tho.
the plan
383 for the motor not sure on the compression and specs yet will find out this week sometime. not sure on price
trans will be my dads old turbo 350 with a 3500 stall and ill be putting a trans brake on maybe changing the stall price is free
the motor will be carbed
tubeular k member
430 gears
and for the chasis im looking for a 94-98 rolling prob looking to spend 2k-3k for a clean one i hope not sure yet tho.