mjr46

if you don't limit yourself to an ots cam , then a custom grind can make sure the valve events are such that your bottom end will be fine and give you the performance you want

FLcracker9

Yes you will need new push rods and rockers for the TFS heads. Custom cam would let you get the most out of your combo (about $350).

Patsfan34

I'm liking where you guys are going with this!!!

Flcracker, sorry about the Dolphins man! Hey at least you got the Tuna back!!! HAHA

Thanks for all the input bro!

mjr46

give Ed a call..or I mean email him...lol he's in your neck of the woods....www.flowtechinduction.com or another option...www.camshaftinnovations.com

Patsfan34

Coventry RI sure is in my neck of the woods. I will contact him and most likely have him do a cam for me. I'd rather spend an extra couple hundred now to save me alot of heartache and time down the road.

Now it's looking like I'm just going to drive my car until November the way it is then pull the engine and do everything in one shot besides the supercharger.

I'll be in the market for a more superior intake so if anyone is going to be dealing one in the upcoming months feel free to contact me!

Thanks again all!

Patsfan34

OK, after talking to Greg at Trick Flow just now and giving him the part numbers he told me these are the heads I'm getting.

http://www.trickflow.com/partdetail....2&autoview=sku

They are 61CC with 170CC runner. Now that I know exactly what they are is $800 a outstanding deal for these heads with a fresh valve job? (I know the answer already but I just need moral support...LOL)