E6 heads on a 255 c.i. block???
#1
E6 heads on a 255 c.i. block???
I've been searching everywhere and coming up empty.
What I need to know is...
1. Will E6 or E7 heads off a 302 c.i. V8 fit on a 1982 255 c.u. block?
2. Are the cast pistons in a 1982 255 flat top or do they have valve reliefs cut into them?
3. What cams are available for a 255 or will any 302 non roller cam work?
Anyone who can help me out with these questions will be a life saver. Thanks in advance.
What I need to know is...
1. Will E6 or E7 heads off a 302 c.i. V8 fit on a 1982 255 c.u. block?
2. Are the cast pistons in a 1982 255 flat top or do they have valve reliefs cut into them?
3. What cams are available for a 255 or will any 302 non roller cam work?
Anyone who can help me out with these questions will be a life saver. Thanks in advance.
#3
Positively the 255 was offered in '82. I've gotten tons of info over at FEP so far... posted the same question on 4 different site. I just want to up the hp of this slug a little... not build a screamer, but I want to be sure it'll work before I tear into a perfectly good engine.
Thread
Thread Starter
Forum
Replies
Last Post