When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
5.0L (1979-1995) MustangTechnical discussions on 5.0 Liter Mustangs within. This does not include the 5.0 from the 2011 Mustang GT. That information is in the 2005-1011 section.
im trying to finish up my short block and when i went to put the spider/lifter retainer on there is no threads for the spider to go into yet there are holes but they dont match the spider
so my question is, is their a possibility i dont need the spider?
thanks
block number is E9AE-8015-aa-13
my cam is Xe282Hr hyd roller with comps hyd antipump lifters
Last edited by redemption; 07-30-2009 at 01:51 PM.
so im trying to figure out if this will still work
Its not going to work... your E9 block isnt a "roller" block.. its meant to use flat tappet lifters. you need to get link bar lifters if you intend to use that cam
ya just found that out o well atleast i dont have to take it back to the machine shop im just gonna get teh comp cam retro fit magnum link bar lifters no worries thanks for clarification