morgan62

i traded for another 302 block it come with a roller cam could any one tell me by the numbers what it came out of or what it is the number,s on the back of the bock are JX175655 THANK,S.

TrimDrip

if I am not mistaken the numbers should be on the side of the block near the oil pan

mjr46

casting numbers or on the ear by the dowl where the starter would be, those numbers you posted are useless

Liv2roc

I may be wrong but "J" is the year 1988
"X" is fords assembly plant code Talbotville, Ontario St. Thomas Assembly
so its not a mustang engine they are dearborn "F"
looks like a truck engine.

mjr46

nope , casting numbers on the block will start with E5, E6, E7 OR F1...ECT ECT E= 80'S SECOND NUMBER = YEAR...F= 90'S

Liv2roc

I know the casting numbers are above the starter. but the numbers he has JX175655 are the cars last 6 vin number stamped on the block behind the intake and it will still tell what it is "j" is the year 1988 "x" is the plant where the car was assembled " Talbotville, Ontario St. Thomas " and the "175655" is the 75655th car built that year and all mustang were built in dearborn so its not a mustang engine.

AdderMk2

well there smart guy. anyone who knows anything about our cars, knows that they didnt have the vin's in the blocks... so please stop giving advise

Liv2roc

yes they do have the vin on the block and trans . my 84 gt 350 does[IMG][/IMG]

AdderMk2

roller blocks arent stamped

89coupe

adders right rollers arent stamped