smkmup90

I currently have a QA1 k member installed with QA1 control arms. It has Strange Engineering shocks with a QA1 coil over kit. With this setup and 17x8 cobra wheels I have to let the springs sit higher which give the car a dumb look since the front is higher then the rear. I cant adjust the springs down cause the springs will rub on the tires. What can I do to solve this? Buy new springs with a different rate? Buy smaller diameter springs?

Thanks

FivePointOhh

yea just get shorter springs with a higher spring rate. you can always call a company and tell them their issue depending on the type and brand of spring you want. their tech reps are usually pretty good with this kind of stuff.

AdderMk2

id go with a smaller diameter spring before I went with a shorter one with a higher spring rate..

FivePointOhh

maybe a lower profile front tire? bring your front rake down.

do you have a little better picture so we could possibly ID your issue?

smkmup90

I can take a picture, what would you like to see?

The picture in my sig you can even see the difference from front to back, looks so bad...haha...

FivePointOhh

took much shading and its hard to tell what your issue is. get a profile shot of the car full color.it will make it easier to determin your issues.