RedStang92

well i just got done removing the smog and a/c and plugged the 2 vacuum lines, and when i started my car the first time it stalled, but the second time it was fine.. it also seems to kinda idle a little lower, but once i drove it around the block and turned it off and tried to start it again, it started right up but had a little hesitation like if it were to stall and but it didn't.

any ideas?

RedStang92

any ideas?

after all day today of driving and doin running around it would stall on first start.

mattdel

plug the holes in the heads?

RedStang92

well their is like square blocks in the back of the head so instead i just cut the line on the passanger side and put a bolt in it to block it off, idk if u can understand what im sayin but i can post pic

mjr46

make sure you capped off any emissions vac lines

chickenbutt

which color vacum lines are they just to make sure i done this corectly? They are color cordinated right?

Tony71502

The EGR vacuum is fed off of the upper intake manifold. Cap the vacuum source on the upper intake and you will not have a leak.

The exhaust gas ports on the back of the heads need plugged. You said you plugged the tube instead of the heads, make sure that bolt is sealed and not leaking. Also, I hope you plugged the tube coming from the H-pipe that feeds exhaust gas to the cylinder heads.