PtV clearance
09-21-2009, 11:57 AM
#1
1st Gear Member
Thread Starter
Join Date: Oct 2008
Location: New Jersey
Posts: 88
PtV clearance
I have an 89 5.0 with world products heads and gt 40 intake, headers cold air, exhaust. i dont wanna take the heads off to check the PtV clearance.(The valve sizes are 1.94 intake,1.60 exhuast) will the x303 cam from ford racing fit without having clearance issues? is it too much cam for my set up?
Last edited by JD5.0stang; 09-21-2009 at 12:15 PM.
09-21-2009, 12:12 PM
#2
5th Gear Member
Join Date: Jan 2006
Location: Puerto Rico
Posts: 3,926
X-303 shouldn't be a problem but you sould always check. You can check PtV (valve drop clearance only, not radial) w/out removing the heads . BTW... you may want to check for a better cam alternative than any of the "cheerleader cams". 
Thread
Thread Starter
Forum
Replies
Last Post
92 5.0stang
5.0L (1979-1995) Mustang
4
08-13-2015 06:46 AM
91LXstanger
5.0L (1979-1995) Mustang
10
04-05-2005 05:01 PM
