jhogan2424

<IMG src=uploads/jhogan2424/54B98_jasonpic2_003.JPG border="0"><IMG src=uploads/jhogan2424/A288C_jasonpic2_011.JPG border="0">Hey folks, when I bought my 93LX it already had all this stuff done to it and I'm not realy sure what it all is. Can somebody please help me identify these parts? I know the supercharger is Vortech but I don't know which one it is. High output? The heads have a "24" stamped in the corner. Are these stock? I will post some pics so maybe someone can help. Thanks a lot in advance, Jason<IMG src=uploads/jhogan2424/91B36_jasonpic2_004.JPG border="0">

horatio102

Well since it's a 93 I'm going to guess that it's not the high output version. Doesn't mean that it wasn't rebuilt with forged stuff and switched to H/O, but I wouldn't bet on it.

jhogan2424

Any thoughts on the heads? What does the "24" that is stamped in the corner mean? My neighbor says he thinks it is stock heads. But he's just an old drunk so I doubt he knows. </P>

95Stealth302

looks rusty

jhogan2424

May look a little rusty, but it's mostly dirt and grime. I never hardly drive it cause every time I do somthing else tears up. But, she did run a 7.41 in the 1/8th mile last weekend. How's that for a rust bucket?<IMG src=smileys/smiley16.gif border="0"></P>

95Stealth302

Pretty nice, I'm not too farmiliar with the Vortech chargers, try posting in the More Power section. Oh, and how do you like your 3.55s in you 95, I'm thinking about getting some.

vfast

could be an s or t -trim what pound boost are you producing? what size pulley? looks like a big one
24 on the heads
that there is them jeff gordan heads!!!!!
I'm not sure on the heads

Pitviper100

yea i doubt its high output but if you run some tets you can figure that out

jhogan2424

vfast, I can't find a tag on the charger anywhere. The pulley measures about 2-3/8 inches. The only person who I can find that even thinks they know anything about the heads is my neighbor. He says the "24" stamped on the corner of them means that they are stock heads. I think he is wrong because the car runs too damn good to have stock heads. (mid 7's in 1/8th) Oh, one more clue... They are not aluminum. Does anyone else with stoch heads have a 24 stamped in the corner like in my pic above? Can you guys even see the 24 in the picture? It's at the base of the valve cover just above the headers right in the corner. C'mon guys, with all these stangers in one place surely one of you can educate me on this. Thanks guys, Jason

95Stealth302

Someone go out and look at their 93 and find out!!! </P>


</P>