ANOTHER IDLE PROBLEM!!!HELP
OK. I just installed a new 65mm TB and my idle of course started acting up. I have the TPS set at .98 Do you guys think that I should raise the TPS to 1.11. Someone told me that if I go bigger on the TB I need to increase the TPS to 1.11. Anyone let me know what you think.
|
RE: ANOTHER IDLE PROBLEM!!!HELP
did you get a new gaset for the IAC valve? No you should leave the tps at .98
|
RE: ANOTHER IDLE PROBLEM!!!HELP
No, I didn't. I sprayed TB cleaner all over and it seems like there is no leaks. Anything else you might think is up??
|
RE: ANOTHER IDLE PROBLEM!!!HELP
dont go any higher then 1.0 volts. if you do higher at idle it will affect WOT. you could have a leak or a youre IAC needs cleaned
|
RE: ANOTHER IDLE PROBLEM!!!HELP
What is the best way to clean the IAC?? I don't want to mess it up.
|
RE: ANOTHER IDLE PROBLEM!!!HELP
spray carb or tb cleaner in the 2 holes until clean and make sure to put a new gasket on it for a tight seal
|
RE: ANOTHER IDLE PROBLEM!!!HELP
Tnanks guys. IAC must have been dirty. I cleaned it out and problem fixed.
|
RE: ANOTHER IDLE PROBLEM!!!HELP
it gets gunked up cause of the EGR crap and the oil that is recirculated into the TB
|
All times are GMT -5. The time now is 09:58 PM. |
© 2024 MH Sub I, LLC dba Internet Brands