hypertruejedi

my 347 stroker seems to be sluggish... it burns 1st, sometimes 2nd (if its cold) but i was expecting far more from it. it seems rather sluggish after 2nd gear and barely pulls until 3000rpms. my slightly modded '06 v6 pulls nearly as hard as the "built" gt. any ideas? i was thinking the timing might be way off but i am not sure what to time it at. thanks

mjr46

how is the 347 built?? parts used??...........did you set timing with a light??

hypertruejedi

http://www.summitracing.com/parts/EDL-60229/
http://www.summitracing.com/parts/ESP-16003030/
http://www.summitracing.com/parts/FMS-M-6250-E303/
http://www.summitracing.com/parts/EDL-2921/

i used a light, but i all i could do for the timing was guess, drive, rinse and repeat. i still dont know what to set the timing at.

jkrum10238

e cam????

hypertruejedi

yup.. my buddies 331 has a e303 and it seems to run well. i assumed it would work for a 347.

AdderMk2

well, you got the intake right... ish

but your cam and heads are straight 302 parts....

remember the saying.. 302 parts, make 302 power

mjr46

what size carb??

mjr46

that intake is good for a 347, if you had the heads and cam to go with it, your best band aid repair , if your keeping the heads and cam on it, would be to use an intake such as the rpm air gap/dual plane intake...

hypertruejedi

650 carb. so i need to either up the heads/cam or get a lesser intake?

AdderMk2

no, you need to get larger heads, a better cam... and a 750 carb MINIMUM