Rear disc swap onto an 8.8, parts needed?
#1
Rear disc swap onto an 8.8, parts needed?
Im about to pick up 5 lug swap stuff from a 96' GT, ive searched the forum, am aware the car will have a wider track.
The thing I cant find is how the rear calipers mount to the axle housing. Are the housings the same on the SN95 cars? Will there be brackets off this donor car that will bolt onto my rear end?
Anyone have pictures of the rear axles and calipers from a SN95 on a fox 8.8?
Thanks in advance
The thing I cant find is how the rear calipers mount to the axle housing. Are the housings the same on the SN95 cars? Will there be brackets off this donor car that will bolt onto my rear end?
Anyone have pictures of the rear axles and calipers from a SN95 on a fox 8.8?
Thanks in advance
#2
Here is one of the blurry pictures I was sent.
I see the rear caliper supports there but am wondering about brackets to the axle housing?
This is what he has for sale
axles, spindles, calipers (X4), rotors (X4), pads (X4), bearings, almost new e brake cables ((X2), brake booster.
I see the rear caliper supports there but am wondering about brackets to the axle housing?
This is what he has for sale
axles, spindles, calipers (X4), rotors (X4), pads (X4), bearings, almost new e brake cables ((X2), brake booster.
#3
https://mustangforums.com/m_968156/tm.htm
^^might shed some light on it. on my pos the strange brake kit came with a bracket
^^might shed some light on it. on my pos the strange brake kit came with a bracket
#4
the brackets bolt onto the end tubes then there is a brace that welds to the axle tube.....
id look for a 95 rear axle or find a tbird rear axle from an auto car they have factory disc with 3.73 trac loc
id look for a 95 rear axle or find a tbird rear axle from an auto car they have factory disc with 3.73 trac loc
Thread
Thread Starter
Forum
Replies
Last Post
Jskeezy84
4.6L General Discussion
5
09-08-2015 01:40 AM
Fast-Hands
5.0L (1979-1995) Mustang
2
08-19-2015 06:54 AM