matt0584

i have built a 347 stroker in my 89. installed canfield heads, holly systemax upper and lower, 70mm mass air flow and throttle body, bbk headers, 30lb injectors, cold air intake, just got it all put together and the car will not stop overloading with fuel. while running in the garage it will burn the eyes only after running for a min. i have 40lbs of fuel pressure at the rail. cannt figure this one out.

AdderMk2

wrong MAF or bad injectors.

fwiw, the maf, TB and intake are a bit too small. Should make gobs of torque, but it wont have much top end

matt0584

Thanks, this is my first ford and also my first fuel injected hotrod so any help and tips will be great,

AdderMk2

you need to figure out what maf you have, and verify your injectors before you proceed