5.0 front crankshaft oil seal
hi everyone i have a 1984 mustang 5.0 ho motor i was just wonder how hard is to do front crankshaft oil seal i notice that underneath my pulley it spit little drips of oil out of it thanks bye
|
well mine was rear install so i had to pull the timing cover to do mine but its not really that hard
|
I dont think you need to pull off the cover, I could be wrong on that. you'll need a puller for the balancer. an impact wrench and 15/16 socket to take off the pulley bolt
|
Originally Posted by 86 5.0L
(Post 7455509)
I dont think you need to pull off the cover, I could be wrong on that. you'll need a puller for the balancer. an impact wrench and 15/16 socket to take off the pulley bolt
i wasnt that lucky |
All times are GMT -5. The time now is 08:02 PM. |
© 2024 MH Sub I, LLC dba Internet Brands