pip sensor
 

ok so i am pulling my motor to replace all gaskets and i thought i would replace all sensors on the engine so they are all new but i cant seem to find where to buy the pip sensor can someone please help me

you can just get a new dizzy. sometimes getting into the pip is hard since there are pins that you have to punch out and they could be well stuck in there

i would rather try and save some money i dont mind a challenge

Just don't damage any wires. Best thing to do is let it ride if it isn't broken!

i got my pip sensor at advance autoparts. it wasn't the most difficult thing to switch out, but it wasn't a piece of cake. mostly because i didnt have all the things i needed

not saying it wasn't possible. you just have to be extra careful because if you need a punch to get the pins out but if you hit too hard, you can damage the shaft

Profile ignition pickup or is called stator inside distributor. Mark the distributor gear and shaft as can be put togeather 180* out.

thanks for all the help i was going to use adders thread of how to disassemble the distrubtor