Head gasket repair
03-31-2011, 06:49 PM
Thread Starter
Join Date: Mar 2010
Location: nj
Posts: 14
Head gasket repair
I am replacing the head gaskets on my 1992 Mustang LX 5.0. I am trying to remove the lower power steering pump bolt. One end appears to thread into the head, the other end that goes through the bracket has a nut. Anyone have any idea how to get this long bolt out, since there seems to be no way to get it out. Thanks in advance for any help
03-31-2011, 06:56 PM
5th Gear Member
Join Date: Jun 2004
Location: Charles Town WV
Posts: 2,288
I put 2 nuts on the bolt tighten them against each other then take the bolt out some times it work some times it dont.
03-31-2011, 10:01 PM
1st Gear Member
Join Date: Aug 2008
Location: GA
Posts: 139
use some good pliers on the NON THREADED portion of the bolt...if the double nut idea doesn't work.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
b8checker
Classic Mustangs (Tech)
8
10-08-2015 12:55 PM
Dathan
V6 (1994-2004) Mustangs
4
10-05-2015 05:52 AM
b8checker
New Member Area
3
09-30-2015 07:11 AM
Drastang
4.6L (1996-2004 Modular) Mustang
2
09-30-2015 03:48 AM
wraith777
General Tech
1
09-28-2015 10:49 AM
1992,
1995,
2005,
50,
50l,
95,
gasket,
gt,
guide,
head,
ls,
mustang,
repair,
repairing,
replacement