87 5.0 SD to MAF conversion problem NEED HELP
#1
87 5.0 SD to MAF conversion problem NEED HELP
To no surprise my 4+ year project is at a hault... It was a neglected one and had a spurt of energy and started putting things together. Well all is together besides some of the EGR equipment.
So the mess, blew up original motor, threw a 306 in it, got ported heads, e303 cam and decided I would convert it to MAF.
So I don't know where my problem exists truthfully. Cranks over and sounds like a have a few firing cylinders, but no dice. Checked distributor and it is lined up correctly, everything is plugged in.
Take any info possible... I did my own conversion for the maf and sorta confident it is in correctly, have a A9S computer, for which I here is a 88 or 89 MAF computer. Anyone have stock pinout chart of an MAF computer so I can check all my wires to the EEC???
So the mess, blew up original motor, threw a 306 in it, got ported heads, e303 cam and decided I would convert it to MAF.
So I don't know where my problem exists truthfully. Cranks over and sounds like a have a few firing cylinders, but no dice. Checked distributor and it is lined up correctly, everything is plugged in.
Take any info possible... I did my own conversion for the maf and sorta confident it is in correctly, have a A9S computer, for which I here is a 88 or 89 MAF computer. Anyone have stock pinout chart of an MAF computer so I can check all my wires to the EEC???
Thread
Thread Starter
Forum
Replies
Last Post
MustangForums Editor
Mustang News, Concepts, Rumors & Discussion
3
11-10-2015 11:39 AM