331 stroker build questions?
Alright fellas, I'm looking into doing a 331 stroker build in my 1992 5.0 lx 5speed. The car right now is just a 302 with bolt ones (b-cam, cai, full exhaust, short throw, clutch etc). So basically what I'm looking for is any advice at all for this stroker build. I want to do it over winter.
I want to do the 331 stroker with nice set of heads, I have a e303 cam that's gonna go in, and a nice upper and lower. Just looking for a quick street car. So some questions that I have are... - will I have to do any suspension work to handle the motor? - will the trans hold the power? - what are some good rotating assemblies for good prices? - basically rebuilding the whole car bit by bit just looking for suggestions and some help Thanks guys!! Also I was looking at a 331kit from coast high performance, what do you think: probe industries 331stroker kit from coast high performance. It comes With: Probe FPS Forged Pistons Probe Cast Steel Crankshafts Machined Beam Steel Rods Moly Rings CL77 Bearings |
I'd ditch the E303 and go with a custom grind. That intake do you have? Heads in mind? For suspension, I'd at least go with upper and lower control arms, subframe connectors, and some torque box reinforcements. The T-5 should be ok for a while. Call up Jim at Ford Strokers, he'll hook you up.
|
I like the CHP kits, I have a freind that worked for them a while back, they were pretty knowledgable on the SBF, so i would consider there kit.
|
Originally Posted by motorman524
(Post 7755808)
I'd ditch the E303 and go with a custom grind. That intake do you have? Heads in mind? For suspension, I'd at least go with upper and lower control arms, subframe connectors, and some torque box reinforcements. The T-5 should be ok for a while. Call up Jim at Ford Strokers, he'll hook you up.
Thanks for the input. What HCI set up do you think would be good? Not trying to go too crazy but I want some good power |
Originally Posted by alexyikes00
(Post 7756046)
I like the CHP kits, I have a freind that worked for them a while back, they were pretty knowledgable on the SBF, so i would consider there kit.
|
Find a nice pair of 185 heads. I really liked my Holly Systemax intake when I had it. Nice intake. That E303 is gonna kill it though.
|
Originally Posted by motorman524
(Post 7756274)
Find a nice pair of 185 heads. I really liked my Holly Systemax intake when I had it. Nice intake. That E303 is gonna kill it though.
|
Like already said DO NOT use the E cam....
302 parts make 302 power..... Sell it and buy a cam for a 331.... What control arms did you get? Make sure you get full length subframe connectors. What is your actual intent for the car? |
Originally Posted by projectresto83
(Post 7756350)
Like already said DO NOT use the E cam....
302 parts make 302 power..... Sell it and buy a cam for a 331.... What control arms did you get? Make sure you get full length subframe connectors. What is your actual intent for the car? |
Also, for the heads do I want pedestal mount or stud mount? And I'm guessing for the rockers which ever I get (pedestal or stud mount) then the rockers go along with that?
|
All times are GMT -5. The time now is 01:40 PM. |
© 2024 MH Sub I, LLC dba Internet Brands