MustangForums.com

MustangForums.com (https://mustangforums.com/forum/index.php)
-   5.0L (1979-1995) Mustang (https://mustangforums.com/forum/5-0l-1979-1995-mustang-14/)
-   -   89 stang wont start need ideas (https://mustangforums.com/forum/5-0l-1979-1995-mustang/668299-89-stang-wont-start-need-ideas.html)

GTnotchback 03-29-2012 03:57 PM

89 stang wont start need ideas
 
Working on an original 87 4 cyl car that now has a 89 5.0 mustang engine and everything. Long story short it ran very well and was put away and stored over winter outside i believe. Sat all winter and now will not start. It just turns over and over and never tries to fire. Looks like it is getting fuel and i can hear the pump run. Just put a new i think its called TPI on the front of the distributer but it didnt help. any ideas to try?

jthorn9 03-29-2012 04:17 PM

Stupid question but you didn't unplug the fuel relay did you?

GTnotchback 03-29-2012 04:38 PM

nope. then the pump wouldnt run right?

ponyracer50 03-29-2012 05:06 PM

you dont mention that you checked spark. check that. simple things to run are power, fuel, spark and then compression. I had a 5.0 sit for a winter and it lost the ring seal so no compression.

GTnotchback 03-29-2012 05:59 PM

o guys heres the latest i have found. Turn key to on and the fuel pump runs constant. Turn key to start and pump shuts off and engine rolls with no fire.
Also it only gets spark on the plug once i let off the key from start position and let it flick back to the on position. what the heck is goin on!? bad ignition where the key goes in?

mattdel 03-29-2012 07:36 PM

Possibly, but more likely the electrical ignition switch that is bolted (riveted?) to the steering column under the shrouds. Either way check both for obvious signs like melting or frayed wiring, and if none seem apparent, replace the electrical switch first.

GTnotchback 03-29-2012 08:13 PM


Originally Posted by mattdel (Post 7892875)
Possibly, but more likely the electrical ignition switch that is bolted (riveted?) to the steering column under the shrouds. Either way check both for obvious signs like melting or frayed wiring, and if none seem apparent, replace the electrical switch first.

anyone know where i can get one? or how to do it?

mattdel 03-29-2012 09:07 PM

http://www.autozone.com/autozone/par...er=368100_0_0_

http://i42.tinypic.com/ou0huu.jpg
http://i42.tinypic.com/2drv149.jpg

GTnotchback 03-30-2012 05:12 AM

wow thanks alot youve done it all but put it in for me!

GTnotchback 03-30-2012 09:58 AM

well dang. i talked to the owner and he said he already replaced the ignition switch. now what im running out of things here other than bad wiring harness


All times are GMT -5. The time now is 06:28 PM.


© 2024 MH Sub I, LLC dba Internet Brands