fordmustang945.0

I just purchased a 94 gt with the following work done to the engine:
-Trickflow upper and lower intake
-Edelbrock Performer heads
-Crower 15511 cam
-1.6 roller rockers
-Hooker shorty headers
-MAC catback exhaust
-MAC CAI
-65mm throttlebody
-190lph fuel pump

The previous owner did all the work to the car. It is using 24lb injectors right now and a bbk adjustable fpr running at 42psi. I think this seems like a little much and I have a set of 19lb injectors sitting around. I just don't want to put them on and run the risk of leaning out the engine. Does it need the 24's or would I be fine putting the 19's in? I really don't want to spend the money on an AEM UEGO to tune it once and then not use the wideband again.

Thanks

mjr46

24's are fine leave it alone

BaltRavens

#24 be all you would need.

nitrous_bob

42 psi vac off ???? your perfect

Venomantidote95

Yes you are good to go dont change a thing but plugs and oil lol, until the time comes to go bigger all around!

ttocs

will a 190lph pump feed 24s in high rpms?

Delia38

#24 be all you would need.

Venomantidote95

yes a 190 will be fine with any rpm one 24`s as long as you have a good working regulator.