smokesricers

So i got the BnM super cooler tranny cooler and i have no idea how to put this thing on. It didnt come with anyther except the cooler itself so im just confused, do i have to run down to the hardware store n buy some lines and mounting hardware or what?

Quik

should of had some fitings

mine is only the cooler nothing else. i cut the tranny lines and ran high psi line from each line into each fitting on the cooler. simple very simple and my cooler is mounted where teh condesnsor was

smokesricers

Where did you get the high PSI lines and how did u attach them to the normal tranny lines

Quik

high psi is fuel injection lines... i used hose clamps and slide it over the fittings and old tranny lines

smokesricers

Creative, but then the tranny cooler has threads how did u get it in their?

Quik

you can buy the adapter fiting or just cut them off

i did that with the stock lines and my new custom bent ones

smokesricers

hey quik i found 1/4 inch fuel hose at the hardware store. Should that work fine or do i need bigger or stronger lines?

Quik

i think mine is like 3/8s or 5/16. it needs to fit over the stockers