my 5.0 build
#1
my 5.0 build
Hey guys im new to this forum. im in the process of doing a 5.0 swap in my 93 lx. The 5.0 is coming out of a 92 cougar i have a few questions before i get too deep in to this swap I've searched all over this forum and didn't find answers. Well first well the k-member thats in the cougar fit in my stang? i ask this because it looks to me the motor is a later 5.0 the power steering pump is located top right on passenger side on the car. And will the rear end bolt up? The rear is 5 lug disk brakes please help
#2
Hey guys im new to this forum. im in the process of doing a 5.0 swap in my 93 lx. The 5.0 is coming out of a 92 cougar i have a few questions before i get too deep in to this swap I've searched all over this forum and didn't find answers. Well first well the k-member thats in the cougar fit in my stang? i ask this because it looks to me the motor is a later 5.0 the power steering pump is located top right on passenger side on the car. And will the rear end bolt up? The rear is 5 lug disk brakes please help
#3
you don't use the cougar k-member, as far as the motor goes yes it'll bolt up, however you need to make sure the firing order that motor carries is an h.o firing order, otherwise scrap that idea for use with the sefi mustang eec iv
Thread
Thread Starter
Forum
Replies
Last Post
Matt's 95 Stang
5.0L (1979-1995) Mustang
2
10-05-2015 07:16 AM
AMAlexLazarus
AmericanMuscle.com
0
10-01-2015 09:21 AM
mungodrums
S550 2015-2023 Mustang
10
09-28-2015 10:54 PM
treesloth
New Member Area
4
09-28-2015 07:03 AM