5.0L (1979-1995) Mustang Technical discussions on 5.0 Liter Mustangs within. This does not include the 5.0 from the 2011 Mustang GT. That information is in the 2005-1011 section.

Hatch/GT body crease question

Old 02-20-2013, 05:26 PM
  #1  
93FOXLX50
Thread Starter
 
93FOXLX50's Avatar
 
Join Date: Feb 2013
Location: NC
Posts: 4
Default Hatch/GT body crease question

Hello,I am hoping to find a answer to my question or if this is a common issue.I have a 93 with factory paint,no accidents and has 98,000 miles,it's really a beautiful car but there are some creases or raised areas in the paint on both sides of the car in the same exact areas "see pic",you can feel as well as see the raises areas,not sure if these areas are where the roof was welded at the factory and not properly finished or if there is rust lurking.I pulled back the interior panel but could not see anything.
Attached Thumbnails Hatch/GT body crease question-img_3016.jpg  
93FOXLX50 is offline  
Old 02-20-2013, 05:34 PM
  #2  
Mike T
2nd Gear Member
 
Mike T's Avatar
 
Join Date: Nov 2012
Location: Mississippi
Posts: 316
Default

I've heard this and I'm sure to be corrected if I'm wrong, that it's body flex from racing. It was told to me by a friend that races his at the track. This is only here-say IMO.

Last edited by Mike T; 02-20-2013 at 05:43 PM.
Mike T is offline  
Old 02-20-2013, 05:47 PM
  #3  
93FOXLX50
Thread Starter
 
93FOXLX50's Avatar
 
Join Date: Feb 2013
Location: NC
Posts: 4
Default

Thanks Mike, Can you see the photo,for some reason it is not allowing me
93FOXLX50 is offline  
Old 02-20-2013, 05:48 PM
  #4  
Mike T
2nd Gear Member
 
Mike T's Avatar
 
Join Date: Nov 2012
Location: Mississippi
Posts: 316
Default

Originally Posted by 93FOXLX50
Thanks Mike, Can you see the photo,for some reason it is not allowing me
Yes, we can see it. I'm sure people more knowledgeable than me will chime in.
Mike T is offline  
Old 02-20-2013, 05:57 PM
  #5  
93FOXLX50
Thread Starter
 
93FOXLX50's Avatar
 
Join Date: Feb 2013
Location: NC
Posts: 4
Default

We bought the car 4 years ago from a family member who had it since 1996,I know some of them had visited the track but never recall this car being run,you answer did cross my mind "body flex"
93FOXLX50 is offline  
Old 02-21-2013, 03:38 PM
  #6  
midlifecrisis1
 
midlifecrisis1's Avatar
 
Join Date: Dec 2011
Location: minnesota
Posts: 21
Default

All 3 of my foxbodies had the same thing. My understanding is that it was done at the factory, in the 80's, when being meticulous wasn't such a big deal on these cars. Currently my 88 GT has 69000 miles with factory paint and it has the blemishes in it also. I don't like it either especially after a good wash and polish as it stands out like a sore thumb.
midlifecrisis1 is offline  
Old 02-21-2013, 09:59 PM
  #7  
Boss_Hotrod
5th Gear Member
 
Boss_Hotrod's Avatar
 
Join Date: Apr 2006
Location: NC
Posts: 2,166
Default

Both of my c-pillars are wavy but the passenger side was hit hard. I think its just flex. Mine is also cracked at the top where the roof rolls off into the hatch channel and at the a-pillar where it was leaded at the factory.
Boss_Hotrod is offline  
Old 02-22-2013, 12:35 AM
  #8  
tinman
5th Gear Member
 
tinman's Avatar
 
Join Date: Aug 2004
Location: Arizona
Posts: 4,103
Default

My '84 hatch has been a race car since about 1998 or so, frames tied and rollbar welded to frame ties.
I've made a bunch of runs in the deep 10 second range with 'real' slicks.
I do not have that body crease or any sign of it........
tinman is offline  
Old 02-22-2013, 10:32 AM
  #9  
midlifecrisis1
 
midlifecrisis1's Avatar
 
Join Date: Dec 2011
Location: minnesota
Posts: 21
Default

Maybe I need to sell my 88 and get an 84? Nah, just kidding.
midlifecrisis1 is offline  
Old 02-22-2013, 11:13 PM
  #10  
tinman
5th Gear Member
 
tinman's Avatar
 
Join Date: Aug 2004
Location: Arizona
Posts: 4,103
Default

I'll look in a couple weeks when the club I belong puts on it annual show, I bet bet there will be 20-30 FOX h/b's besides mine and see how much of a problem this.
tinman is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Luke9222
4.6L General Discussion
19
10-22-2015 11:55 PM
copestang
2005-2014 Mustangs
4
10-11-2015 07:17 AM
GimpyHSHS
4.6L (1996-2004 Modular) Mustang
3
09-18-2015 12:27 PM
Mustangmalo
General Tech
2
09-06-2015 05:22 PM


Thread Tools
Search this Thread
Quick Reply: Hatch/GT body crease question



All times are GMT -5. The time now is 12:26 AM.